
|
Model LR80E* 8000/7500 Watts
Generator type totally brushless with capacitor, copper windings voltage plus™, <6% distortion, exclusive smooth wave™, csa listed.
FRAME SPECIFICATIONS:
| NET DIMENSIONS (METRIC) |
| L |
W |
H |
WEIGHT |
|
| 30(76) |
24(61) |
25(64) |
216(98) |
|
| PACKED DIMENSIONS |
| L |
W |
H |
WEIGHT |
CUBIC FT |
| 31(79) |
25(64) |
26(66) |
230(105) |
11.7 |
|
 |
| |
WATTS |
|
RATED AMPS |
|
|
|
|
| MODEL |
MAXIMUM
Surge |
RATED
Continuous |
VOLTAGE |
@120V |
@240V |
FREQ. |
PHASE |
RPM |
ENGINES |
| LR80E |
8000 |
7500 |
120/240 |
62.5 |
31.25 |
60Hz |
1 |
3600 |
16HP VANGUARD 303400 |
| RECEPTACLES |
PLUGS REQUIRED FOR RECEPTACLES
(Not Supplied) |
| 2-20 AMP, 120V, NEMA, 5-20R, STRAIGHT BLADE TYPE WITH (4 OUTLETS 2 DUPLEX) |
5-15P OR 5-20P |
| 1-30 AMP, 120V, TWISTLOCK, NEMA L5-30R |
L5-30P |
| 1-30 AMP, 240V, TWISTLOCK, NEMA L14-30R |
L14-30P |
| CIRCUIT BREAKER PROTECTOR FOR EACH RECEPTACLE |
| FUEL TANK 8 GALLONS (APPROXIMATE) |
LR80E |
| RUN TIME 1/2 LOAD |
9.9 HOURS |
| RUN TIME FULL LOAD |
6.0 |
ENGINE & DECIBLES (AVERAGE VALUES)
| DBA |
MODELS
ALL ENGINES FEATURE SOLID STATE IGNITION AND RECOIL STARTERS |
DISPLACEMENT |
| 76.5 |
LR80E AT 7 METERS 16 HP VANGUARD TWIN CYLINDER, OHV, LOW OIL SHUT DOWN, ELECTRIC START* WITH AUXILIARY RECOIL STARTER, LOW TONE MUFFLER, CAST IRON CYLINDER LINERS |
480 CC |
FRAME: 1" WELDED STEEL ROLL CAGE FRAME WITH ISOLATED RECESSED CONTROL PANEL STANDARD
CHANGES: All specifications and dimensions are subject to change without notice and there is no obligation to make changes in units previously sold. RATINGS: Apply to altitudes up to 1000 feet, standard cooling, normal ambients and gasoline fuel. Reduce ratings 3-1/2% for each 1000 feet above sea level and 1% for each 10∞ farenheight rise above 60∞ farenheight. Connection of a generator to a home or building requires a transfer switch. Consult a qualified technician. *Electric start models are shipped less battery. Required battery 300 cold cranking Amps, 5" Maximum width. Type U1 battery 12 Volts DC.
© 2006 SML Industries, Inc. Disclaimer Information
|